Land Pride BB0548

Double tap to zoom

FEATURES	BENEFITS
3/16” Side panels	Strongest in this class.
Square tubing shank support	Many competitors use angle iron. Box tubing is stronger.
Clevis -type lower 3-point hitch	Much stronger than pin type hitch.
3-Position heat treated spring steel shanks	Offers flexibility for deep to shallow settings and Heat-treated for longevity.
Working widths	48", 54"
HP Range	17-25 HP
Bump-formed moldboard	While scraping, this allows the dirt to roll off the moldboard creating less drag resulting in lower HP requirements and faster working conditions.
12 3/4” Moldboard height	Box Scraper can hold a lot of material.
Moldboard	Heavy moldboard with precise roll holds its shape under heavy loads.
Heat-treated, dimpled-on tips	Easy to replace tips that are heat treated for toughness.
Heat-treated, reversible and replaceable cutting blades	Heat-treated for hardness. Reversible so both edges can be used before replacing the cutting blades.
Rear backfill blade	Rear backfill blade allows for backfilling trenches or foundations.
Cat. 0, Cat.1 & Cat. Limited with Quick Hitch capability	Fits a wide variety of tractors. Quick hitch capability allows for easy hook-up.
Two welded braces extending from front to rear of bucket	These braces help keep the Box Scraper square under heavy loads.

Model	BB0548
Working Width	48"
Capacity	7 cu. ft.
Weight	277 lbs.
Number of Shanks	4
Shank Material	3/4" x 2 1/2" x 15" heat treated spring steel
Shank Penetration	2- positions (Out of the ground or 2 3/8" below scraper end plates)
Shank Tip Construction	Replaceable heat treated dimpled-on tips
Shank Beam	4" x 4" x 1/4" Square Tubing
Lift Mechanism	Manual lift with spring retainer at each shank
Moldboard	Bumped-formed moldboard -13 5/16" high
Side Panels	3/16" thick x 12 3/4" high x 20" deep
Depth of Bucket	18 1/2"
Bucket Reinforcement	Two welded braces to rear of moldboard
Cutting Blades	2 ea. 1/2" x 6" high carbon, heat treated cutting edges; reversible and replaceable
Maximum H.P. Rating	25 HP
A-Frame Material	3/8" x 3" C1021
3-Point Hitch Type	Clevis type lower hitches Cat. 0, Cat. I & Cat. I Limited (Fits Land Pride Quick Hitch)