H&S Model HPV4242 » Roeder Implement Inc., Iowa
Case IH
Roeder Implement Inc., Iowa
Roeder Implement Inc., Iowa
Dubuque
563-557-1184
2550 Rockdale Rd.
Dubuque, IA 52003
Call Us
Directions
Browse Inventory »
Online Parts »

H&S Model HPV4242

New Products / H&S / Manure Spreaders / Hydraulic Push Manure Spreaders / Model HPV4242

Double tap to zoom

 

Features

  • Vertical beaters.
  • Vertical beaters feature “REVERSE FLIGHTING” on the top 21″ of the beater flighting. This patented feature allows for an even spread pattern of material.
  • All Hydraulic Push models use solid virgin grade poly with UV inhibitor, for the floor and sides allowing less friction.
  • The hydraulic endgate has 2 cylinders with ⅜″ hose and pipe for faster operation in cold weather.
  • Heavy duty rectangular tubing is used for the pole to ensure strength and long life. Structural channel floor supports spaced 9 ½″ apart are used for maximum floor support.
  • The bottom drive Monoblock Gearbox features an overrunning clutch that provides protection to the driveline.
  • The Hydraulic Push-Off System on all models features two hydraulic cylinders that sequence to reduce push-off forces for fast unloading of material.
  • Beater blades are replaceable and the beater assembly is removable for stockpiling manure.
  • Removal of the beater assembly is done by simply removing the mounting bolts and disconnecting the PTO gearbox driveshaft .

Specifications

HPV4242
CAPACITY – OLD RATING 425 Bushel
CAPACITY CU. FT, STRUCK LEVEL 270
SIDE LOADING HEIGHT 61 ¼″
2ND OR VERTICAL BEATER HEIGHT 104 ½″
HEIGHT-TOP OF HYD. END GATE (W/O HOOK) 65″
HEIGHT-TOP OF SCREEN (VERT. BEATER ONLY) 98″
INSIDE WIDTH 72″
INSIDE LENGTH 16′
INSIDE DEPTH 34″
OVERALL WIDTH W/TIRES 10′ 2″
OVERALL LENGTH 27′ 5″
STANDARD NUMBER OF BEATERS 2
HORIZONTAL BEATER DIAMETER/LOWER N/A
HORIZONTAL BEATER DIAMETER/UPPER N/A
VERTICAL BEATER DIAMETER 34″
REPLACEABLE BEATER PADDLES YES
REMOVEABLE BEATER ASSEMBLY YES
HYDRAULIC PUSH CYLINDER DIAMETER 3 ½″
HYDRAULIC PUSH CYLINDER HOSE DIAMETER ⅜″
HUB 8 Bolt
SPINDLE SIZE 3″
TIRE SIZE – STANDARD 425 x 22.5
TIRE SIZE – OPTIONAL 19L x 16.1 10 Ply
HYDRAULIC END GATE Standard
CYLINDERS ON HYDRAULIC END GATE 2 W-⅜″ Hose
REAR PAN Standard
JACK Standard
WOOD SIDE RAILS Standard
WEIGHT W/TIRES 7,900#
PTO CHOICES
540 RPM PTO
w/ OVER RUNNING TORQUE LIMITING CLUTCH		 YES
1,000 PRM PTO
1¾ or 1¾ w/ SHEAR BOLT PROTECTION		 YES
1,000 PRM PTO
1¾ or 1¾ w/ OVER RUNNING TORQUE LIMITING CLUTCH		 YES