Specifications: Steiger 550 available from Roeder Implement, Iowa

 
MODELS 400 450 500 550 600
Power          
Type Tier 4A with Selective Catalytic Reduction (SCR)
Engine HP at Rated RPM 400 hp @ 2100 rpm 450 hp @ 2100 rpm 500 hp @ 2100 rpm 550 hp @ 2100 rpm 600 hp @ 2100 rpm
Maximum Engine HP 446 hp 502 hp 507 hp 5580 hp 608 hp
Cylinders / Displacement 6 cyl. / 12.9L (787 cu. in.)
Number of valves 24
Aspiration Turbocharged (Wastegate) with Air to Air Aftercooling Turbocharged (2 stage) with Air to Water Intercooling and Air to Air Aftercooling
Electrical          
Alternator 200 amp
Batteries Two 12 volt, 1000 CCA
Transmission / PTO          
Transmission - Standard Full Powershift 16F/2R w/16 Hi (25 mph / 40 kph)
PTO (optional) 1000 rpm – 1-3/4 in shaft
Axles          
Axle Diameter (standard/optional) 5-in (127 mm) – Planetary Flanged 4.5 in. (115 mm) Planetary 4.5 in. (115 mm) / 5.5 in. (140 mm) 5.5 in. (140 mm) Compound
Axle Width 90.3 in. (2294 mm)
Wheelbase 154 in. (3912 mm)
Hydraulics / Hitch          
Remote Valves - Std./Opt 4 / Up to 8
Standard Hydraulic Pump (PFC) 42 gpm (159 lpm)
Optional High Flow Hydraulic Pump (PFC) 57 gpm (216 lpm)
Optional TwinFlowHydraulic Pump (PFC) 56 gpm (212 lpm)
Total Tractor Hydraulic w High/Twin Flow Pumps 113 gpm (428 lpm)
Available Flow at Single Remote Valve 35 gpm (132 lpm)
3-point Hitch Category – Optional Cat IV-N
Hitch Lift Capacity 19,600 lb. (8900 kg)
Capacities          
Fuel Tank 310 gal. (1170L) 470 gal. (1779L)
Diesel Exhaust Fluid (DEF) Tank 64 gal. (242L)
Cab          
Volume (Size) 132 cu. ft. (3.7 cu. m)
Glass 88.1 sq. ft. (8.18 sq. m)
Weight          
With GY 710/70R42 DT820 HD Duals 36,048 lb. (16 351 kg) 39,492 lb. (17 913 kg) 44,046 lb. (19 979 kg) 45,868 lb. (20 805 kg)
With 30 tracks   53,554 lb. (24 292 kg) 53,804 lb. (24 405 kg)
Maximum Ballasted Weight 49,500 lb. (22 453 kg) 56,000 lb. (25 401 kg) 56,000 lb. (25 401 kg) 66,000 lb. (29 937 kg)