Specifications: SC101 available from Roeder Implement, Iowa

 
SC101 w/14 ft. Header w/16 ft. Header w/18 ft. Header
Dimensions
Transport/overall width
[defined by header width]
16 ft. 3 in. (4.95 m) 18 ft. 3 in. (5.56 m) 20 ft. 3 in. (6.17 m)
Cutting widths 14 ft. 3 in. (4.34 m) 16 ft. 3 in. (4.95 m) 18 ft. 3 in. (5.56 m)
Overall length 25 ft. 11 in. (7.90 m) 25 ft. 11 in. (7.90 m) 29 ft. 7 in. (9.02 m)
Overall height      
Operating position 73 in. (1854 mm) 73 in. (1854 mm) 73 in. (1854 mm)
Transport position 80 in. (2032 mm) 80 in. (2032 mm) 80 in. (2032 mm)
Track width 152 in. (3861 mm) 152 in. (3861 mm) 152 in. (3861 mm)
Ground clearance to guard tips 25 in. (635 mm) 25 in. (635 mm) 25 in. (635 mm)
Crop Discharge
Swath width 96 in. (2438 mm) 96 in. (2438 mm) 96 in. (2438 mm)
Windrow width 38-60 in. (965-1524 mm) 38-60 in. (965-1524 mm) 38-60 in. (965-1524 mm)
Adjustments Swath gate adjusted lowered provides 96 in. swath. Swath gate raised allows adjustable windrow shields to produce windrow widths between 38 in. and 60 in.
Weight
Shipping – less header 3,522 lbs. (1598 kg) 3,554 lbs. (1612 kg) 3,668 lbs. (1664 kg)
Operating – less header 3,347 lbs. (1518 kg) 3,379 lbs. (1533 kg) 3,493 lbs. (1584 kg)
Tractor Requirements
Minimum PTO power 60 hp (45 kW) 60 hp (45 kW) 60 hp (45 kW)
Remotes 2 2 2
Relief pressure 1750 psi (121 bar) 1750 psi (121 bar) 1750 psi (121 bar)
Minimum drawbar Category II Category II Category II
7-pin electrical connector Required for lighting Required for lighting Required for lighting
Hitch type Swivel ball in standard hitch extension w/clevis on implement tongue
Tires
Size, ply rating and type 31 x 13.50-15, 8 ply, I1, agricultural implement rib tire
Inflation pressure 30 psi (2.07 bar) 30 psi (2.07 bar) 30 psi (2.07 bar)
Hydraulics
Swing circuit Double-Acting, 3 in. (76.2 mm) bore X 19 in. (482.6 mm) stroke
Raise/lower circuit Single-Acting, Master/Slave, 2.5 in. (63.5 mm) bore X 10 in. (254 mm) stroke
Tilt circuit Single-Acting, 2 in. (50.8 mm) bore X 10 in. (254 mm) stroke
Hydrostatic Header Drive System
Pump drive speed 1000 rpm only 1000 rpm only 1000 rpm only
Pump type Fixed displacement, gear-type, w/thrust bearing on input shaft
Pump drive Telescoping PTO, category 3 w/standard u-joints
Pump mount Swivel mounted on 1.75 in. (44.5 mm) composite non-greaseable bushing w/steering link attached to hitch extension
Flow @ rated speed 29 gpm (110 lpm) 29 gpm (110 lpm) 29 gpm (110 lpm)
Relief valve setting 3300 psi (228 bar) 3300 psi (228 bar) 3300 psi (228 bar)
Motor type Fixed displacement, gear-type Fixed displacement, gear-type Fixed displacement, gear-type
Reservoir capacity 28 gal. (105 l) 28 gal. (105 l) 28 gal. (105 l)
Operating Speeds
Field 0 - 8 mph (0 - 13 kph) 0 - 8 mph (0 - 13 kph) 0 - 8 mph (0 - 13 kph)
Transport 20 mph (32 kph) 20 mph (32 kph) 20 mph (32 kph)
Safety Features
Lighting Brake/Flasher/Turn signal lights – Standard
Transport swing lock Standard mechanical stop w/spring-loaded locking pin to facilitate ease of actuation
Transport lift lock Standard mechanical lift cylinder stops
Safety chain Standard Standard Standard