Specifications: HDX182 available from Roeder Implement, Iowa

 
Model HDX122 HDX142 HDX162 HDX182 HSX142 (Grass Header)
Cutting width 12 ft. 3 in. (3.73 m) 14 ft. 3 in. (4.34 m) 16 ft. 3 in. (4.95 m) 18 ft. 3 in. (5.56 m) 14 ft. 3 in. (4.34 m)
Overall width 14 ft. 3 in. (4.34 m) 16 ft. 3 in. (4.95 m) 18 ft. 3 in. (5.56 m) 20 ft. 3 in. (6.17 m) 16 ft. 3 in. (4.95 m)
Weight – rubber rolls/steel rolls 3,630 lb. (1647 kg)/ NA 3,900 lb. (1770 kg)/ 4,000 lb (1815 kg) 4,120 lb. (1869 kg)/ 4,220 lb. (1015 kg) 4,370 (1983 kg)/ 4,470 lb (2083 kg) 3,260lb. (1479 kg) w/o conditioner/ NA
Cutterbar          
Type Timed dual counterstroking Timed dual counterstroking Timed dual counterstroking Timed dual counterstroking Timed dual counterstroking
Drives Right-hand and left-hand wobble with shaft drive Right-hand and left-hand wobble with shaft drive Right-hand and left-hand wobble with shaft drive Right-hand and left-hand wobble with shaft drive Right-hand and left-hand wobble with timing belt drive
Knives Overserrated, bolted Overserrated, bolted Overserrated, bolted Overserrated, bolted Overserrated, bolted
Guards 2-tine, double hardened 2-tine, double hardened 2-tine, double hardened 2-tine, double hardened 2-tine stub, Independently adjustable
Angle range 6-12 degrees 6-12 degrees 6-12 degrees 6-12 degrees 6-12 degrees
Adjustable skid shoes 2 4 4 4 4
Cutting height range 1.2-6.2 in. (30.5-157 mm) 1.2-6.2 in. (30.5-157 mm) 1.2-6.2 in. (30.5-157 mm) 1.2-6.2 in. (30.5-157 mm) 1.2-6.2 in. (30.5-157 mm)
Sickle Drive          
Type Open dual wobble Open dual wobble Open dual wobble Open dual wobble Open dual wobble
Speed 1,810 SPM 1,810 SPM 1,810 SPM 1,810 SPM 1,828 SPM
Stroke 3 in. (76 mm) 3 in. (76 mm) 3 in. (76 mm) 3 in. (76 mm) 3 in. (76 mm)
Reel          
Type 5-bat 5-bat 5-bat 5-bat 6-bat
Adjustments Fore/aft and vertical Fore/aft and vertical Fore/aft and vertical Fore/aft and vertical Fore/aft and vertical
Speed – Std. mech. drive 52-83 RPM 52-83 RPM 52-83 RPM 52-83 RPM NA
– Opt. Hyd. Drive 0-76 RPM 0-76 RPM 0-76 RPM 0-76 RPM 0-76 RPM Standard
Speed adjustment Variable sheave Variable sheave Variable sheave Variable sheave Variable, from cab
Max. diameter 42 in. (1067 mm) 42 in. (1067 mm) 42 in. (1067 mm) 42 in. (1067 mm) 42 in. (1067 mm)
Drive Belt and chain Belt and chain Belt and chain Belt and chain Hydraulic
Tine bars Segmented Segmented Segmented Segmented Segmented
Cam-bearings 1.25 in. (31.75 mm) 1.25 in. (31.75 mm) 1.25 in. (31.75 mm) 1.25 in. (31.75 mm) 1.25 in. (31.75 mm)
Reel bushings 1 in. (25.4 mm) 1 in. (25.4 mm) 1 in. (25.4 mm) 1 in. (25.4 mm) 1 in. (25.4 mm)
Conditioner          
Type Rubber-on-rubber Rubber-on-rubber, steel-on-steel or High Contact Rubber-on-rubber, steel-on-steel or High Contact Rubber-on-rubber, steel-on-steel or High Contact NA
Roll length (crush area) 102 in. (2591 mm) 102 in. (2591 mm) 102 in. (2591 mm) 102 in. (2591 mm) NA
Roll diameter 10.375 in. (263.5 mm) 10.375 in. (263.5 mm) 10.375 in. (263.5 mm) 10.375 in. (263.5 mm) NA
Roll drive Spur gearbox &PTOs Spur gearbox &PTOs Spur gearbox &PTOs Spur gearbox &PTOs NA
Speed 717 RPM 717 RPM 717 RPM 717 RPM NA
Gap/pressure adjustments Hand cranks Hand cranks Hand cranks Hand cranks NA
Auger          
Type Single, floating Single, floating Single, floating Single, floating Single, floating
Diameter 20 in. (508 mm) 20 in. (508 mm) 20 in. (508 mm) 20 in. (508 mm) 20 in. (508 mm)
Floating range 2 in. (50.8 mm) 2 in. (50.8 mm) 2 in. (50.8 mm) 2 in. (50.8 mm) 2 in. (50.8 mm)
Flighting depth 5 in. (178 mm) 5 in. (178 mm) 5 in. (178 mm) 5 in. (178 mm) 5 in. (178 mm)
Speed 287 RPM (w/45T driven sprocket) 287 RPM (w/45T driven sprocket) 287 RPM (w/45T driven sprocket) 287 RPM (w/45T driven sprocket) 196 RPM
Windrow width 36-96 in. (910-2438 mm) 36-96 in. (910-2438 mm) 36-96 in. (910-2438 mm) 36-96 in. (910-2438 mm) 60 or 83 in. (1524 or 2108 mm)