Specifications: DC132 available from Roeder Implement, Iowa

 
Model DC92 DC102 DC132 DC162
Cutting dimensions
Cutting width 9 ft. 2 in. (2.8 m) 10 ft. 4 in. (3.16 m) 13 ft. 0 in. (4.0 m) 15 ft. 7 in. (4.8 m)
Cutting height 0.95-3.2 in. (24-81 mm) 0.95-3.2 in. (24-81 mm) 0.95-3.2 in. (24-81 mm) 0.95-3.2 in. (24-81 mm)
w/ high-stubble shoes 2.25-4.5 in. (58-115 mm) 2.25-4.5 in. (58-115 mm) 2.25-4.5 in. (58-115 mm) 2.25-4.5 in. (58-115 mm)
Cutterbar tilt angle 2-10 degrees 2-10 degrees 2-10 degrees 2-10 degrees
Cutterbar type Individually sealed modules Individually sealed modules Individually sealed modules Individually sealed modules
Cutterbed
Number of discs/knives 7/2 - reversible, swingaway 8/2 - reversible, swingaway 10/2 - reversible, swingaway 12/2 - reversible, swingaway
Disc speed @ rated RPM 3,000 rpm 3,000 rpm 3,000 rpm 3,000 rpm
Shear protection Std. – Frangible splines in disc drive hub Std. – Frangible splines in disc drive hub Std. – Frangible splines in disc drive hub Std. – Frangible splines in disc drive hub
Cutterbar flotation Vertical and lateral, adjustable springs Vertical and lateral, adjustable springs Vertical and radial adjustable springs Vertical and radial, adjustable springs
Conditioner
Type Spiral intermeshing molded rubber rolls Flail rotor with 90 tapered flails Spiral intermeshing molded rubber or steel rolls Flail rotor with 100 tapered flails Spiral intermeshing molded rubber or steel rolls Flail rotor with 100 tapered flails Spiral intermeshing molded rubber or steel rolls Flail rotor with 100 tapered flails
Length 90 in. (2286 mm) 90 in. (2286 mm) 102 in. (2591 mm) 102 in. (2591 mm) 102 in. (2591 mm) 102 in. (2591 mm) 102 in. (2591 mm) 102 in. (2591 mm)
Diameter 2 x 10.4 in. (264 mm) rolls 1 x 22 in. (560 mm) flail rotor 2 x 10.4 in. (264 mm) rolls 1 x 22 in. (560 mm) flail rotor 2 x 10.4 in. (264 mm) rolls 1 x 22 in. (560 mm) flail rotor 2 x 10.4 in. (264 mm) rolls 1 x 22 in. (560 mm) flail rotor
Drive 4 HB V-belt and enclosed gears 4 HB V-belt and enclosed gears 4 HB V-belt and enclosed gears 4 HB V-belt and enclosed gears 4 HB V-belt and enclosed gears 4 HB V-belt and enclosed gears 4 HB V-belt and enclosed gears 4 HB V-belt and enclosed gears
Speed 647 rpm Std. – 1,016 rpm
Opt. – 730 rpm
635 rpm Std. – 1,016 rpm
Opt. – 730 rpm
740 rpm Std. – 1,011 rpm
Opt. – 726 rpm
740 rpm Std. – 1,011 rpm
Opt. – 726 rpm
Conditioning roll tension/hood adj. Drawbolt stop, each end Single crank adj. of hood above rotor Single crank; Conditioner gap adjustment: Drawbolt stop, each end Single crank adj. of hood above rotor Single crank; Conditioner gap adjustment: Drawbolt stop, each end Single crank adj. of hood above rotor Single crank; Conditioner gap adjustment: Drawbolt stop, each end Single crank adj. of hood above rotor
Swath width 6 ft. (1.8 m) 6 ft. (1.8 m) 7 ft. (2.1 m) 7 ft. (2.1 m) 8 ft. (2.4 m) 8 ft. (2.4 m) 8 ft. (2.4 m) 8 ft. (2.4 m)
Windrow width 3-6 ft. (0.9-1.8 m) 3-6 ft. (0.9-1.8 m) 3-7 ft. (0.9-2.1 m) 3-7 ft. (0.9-2.1 m) 3-8 ft. (0.9-2.4 m) 3-8 ft. (0.9-2.4 m) 3-8 ft. (0.9-2.4 m) 3-8 ft. (0.9-2.4 m)
Driveline
Input speed 540 rpm 540 or 1,000 rpm 1,000 rpm 1,000 rpm
Driveline protection Slip clutch and overrunning clutch assembly at rear of PTO shaft Slip clutch and overrunning clutch assembly at rear of PTO shaft Slip clutch and overrunning clutch assembly at rear of PTO shaft Slip clutch and overrunning clutch assembly at rear of PTO shaft